Innova Informatica
EQUIP Cable DVI Dual Macho-Macho 5metros (EQ118935)

EQUIP Cable DVI Dual Macho-Macho 5metros (EQ118935)

En tu casa en Canarias en 24/48 horas.
13,15
IGIC incluido
DESCRIPCIÓN RÁPIDA
EQUIP Cable DVI Dual Macho-Macho 5metros (EQ118935)

 

CONDICION  Producto nuevo
Modelo  118935
EAN  4015867593318

Características técnicas

Fabricante: Equip
Nombre de producto: DVI-D/DVI-D 5.0m
Código del producto:118935
Código EAN/UPC:4015867593318

Características
Longitud de cable
How long the cable is.
5 m
Conector 1
This is the first connector in the device.
DVI-D
Conector 2
This is the second connector in the device.
DVI-D
Género del conector 1
Macho
Género del conector 2
Macho
Tipo de género
Gender (type) of a product.
Macho/Macho
Color del producto
El color ej. rojo, azul, verde, negro, blanco.
Negro
Magnéticamente protegida
Características
Número de capas de blindaje
2
Dual Link DVI
A dual-link DVI interface sends data over both of the DVI links to the monitor, and this is how higher resolutions are achieved. With dual-link DVI, a resolution of 2048 x 1536 is possible.
Velocidad de transferencia de datos
Rate at which data can be transferred MC; expressed in units per second; may vary on network configurations
9,9 Gbit/s
Máxima resolución
The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
2560 x 1600 Pixeles
Formatos gráficos soportados
The graphic resolutions that can be displayed by the device. The graphic resolution describes the width and height dimensions of a display, such as a computer monitor, measured in pixels.
1920 x 1200 (WUXGA),2560 x 1600 (WQXGA)
Acorde RoHS
The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.